You bought all the hardware components for your dream build, going for the best bang for the buck deals. Here comes the question, where to put them? That’s where the case comes right in. A case is essential for building a PC as it is one of the foremost things you need for fitting all other components in a housing so that wiring can be laid out properly.
The most important factor in deciding which PC case to buy is its size, which fits all your components. Before moving on to the best full tower cases, let’s look at some crucial size-related details. PC cases come in various sizes: small form factor, mini-tower, mid-tower, and full tower.
A full tower case is ideal for gamers, servers, and professionals and building workstations. You have come to the right place if you are looking for a full tower case but have problems deciding which one to go for. We have compiled a list of the best full tower cases in 2022 you can choose from. We have ensured to categorize them based on the traits they present alongside their pros and cons helping you make a firm decision according to your specific needs.
Best Full Tower PC Cases
The primary purpose of a full-tower case is to house the biggest and greatest PC components and to provide sufficient cooling to keep them operating at peak efficiency. We refer to cooling designs that are just impractical for smaller systems. Custom water cooling loops with several radiators and fans are what we’re talking about here.
It will mostly depend on your particular preferences when selecting an appropriate full-tower case; just consider everything a good PC case should have, such as enough space for your GPU and cooler and adequate ventilation. But remember that these giant PC cases housing many features have a higher price tag and are mostly suitable for ultimate PC enthusiasts. If you are a little tight on budget, a top-tier mid-tower case will probably be best for you.
Full tower cases are the best and probably the only option for those going all in while building their dream PC. If you can install the largest motherboards, beefiest coolers, monstrous graphic cards, and a huge amount of SSDs and HDDs that will not let you run out of storage any time soon, who doesn’t want all this?
We’ve tested numerous full-tower PC cases based on their motherboard compatibility, hardware clearance, cooling, airflow, and aesthetics, and we heartily recommend the following for your upcoming PC setup.
Last update on 2022-12-08
Based on our research, these are the Best Full Tower PC Cases In 2022:
- Thermaltake View 51 Snow
- Cooler Master Cosmos C700P Black Edition
- Phanteks Enthoo Pro Full Tower
- be quiet! Dark Base Pro 900
- Lian Li LI PC-O11 Dynamic EVO ATX Full Tower
Thermaltake View 51 Snow
White Full Tower PC Case
Specifications: Type: Full-Tower Case | Colors: Black and White | Motherboard Support: Mini-ITX, E-ATX, ATX, MicroATX | Dimensions: 550 x 315 x 525 mm | GPU Clearance: 440 mm | CPU Cooler Clearance: 175 mm | PSU Clearance: 200 mm | Ports: 1x USB 3.1 Gen 2 Type-C, 2x USB 3.0, 2x USB 2.0, headphone, mic, RGB button | Drive Bays: 2x 3.5-inch, 2x 2.5-inch | Included Fans: Total 3x fans – 2x 200 mm RGB (Front) and 1x 120 mm RGB (Rear)
Thermaltake is a renowned brand that supplies all kinds of computer-related accessories, including power supplies, cooling solutions, RAM sticks, and chassis, just to name a few. Since we’re on the topic of PC cases, Thermaltake has got you covered. They offer a wide range of cases for you to work with that, including Cube chassis for Mini-ITX motherboards, Open-frame chassis where half of the chassis is glass, middle tower chassis, mini and micro chassis, and finally, super tower and full tower chassis, which we are going to dive in today.
Among these full tower chassis is Thermaltake View 51, one of the best cases Thermaltake offers. It comes in two variants, one in a black version and the second is a white version called the Snow variant, which happens to be the one we are reviewing now. This glorious case may be categorized as a full tower case, but it still looks like a cube-style chassis in a much larger form.
Let’s get right into it by starting off with the exterior. The front panel holds two 200 mm RGB fans that sit behind a 4mm tempered glass removable window. Just at the right side of these fans, we get the I/O ports laid in a vertical layout consisting of a USB Type-C port, two USB 3.0 ports, two USB 2.0, two separate headphone and mic ports, and a reset button that allows you to control the RGB functionality of the included fans.
Moving on the main site of the case, another 4mm thick tempered glass removable window can be seen, which sits on a hinge that can be smoothly opened like a door by twisting the knob they provided. Since this case is named ‘View,’ none of the tempered glass windows are tinted. Therefore, all your components are clearly visible and are meant to be openly showcased. Opening up the main window, we are led to a spacious interior that features a 120 mm fan pre-installed at the rear end of the case. This case already arrives with a vertical GPU mount, but riser cables aren’t included, so you need to purchase it separately. Along the bottom of the case, there are two SSD mounts and a mount to install a Pump / Reservoir combo if you choose to build it with liquid cooling.
A separate adjustable mount lies at the very right end that can easily be moved at different spots at the bottom. All the mounts at the bottom are removable, which, once removed, provide enough space for three 120 mm fans or a single 360 mm radiator to be installed. However, to install a radiator, it must be a slim one since the fans on a standard thickness radiator will collide with the bottom of the vertical GPU mount. Once the vertical mount is removed, you are free to install a radiator with any thickness that you desire.
Underneath the bottom is a slidable dust filter that is accessible from the back of the case. Speaking of the backside, there is room for three 120 mm fans or for a 360 mm radiator. There is motherboard I/O shield space at the backside, hard drive bays, PCIe slots, and a cutout for the power supply. The eight PCIe slots can be rotated sideways by remounting it by unscrewing a few screws. The power supply installation can be a little tricky since it fits inside the case sideways behind the motherboard tray.
On the front side, there is enough space to install three 120 mm fans or three 140 mm fans or two 200 mm fans or a 360 mm radiator. All of this rest on a bracket is removable to make the installation process easier. The top of the case has the same support for fans and radiators as the front panel. A removable tempered glass panel covers the top portion of the case.
The back panel can be easily removed since it is held by two screws. Uncovering this panel, we can see space left for hard drives, PSU, cables, and it even has space for two dust filters. In the middle of it, there is a fan hub for the three pre-installed fans. This hub is connected to the motherboard through a 3-pin A-RGB header.
What We Liked:
The Thermaltake View 51 Snow is a great white PC case that highlights your components due to its white chassis. The exposed windows on top and the front provide a great view. This also is a great way to display your illuminated components that reside inside, including the fans, colorful RAM sticks, and especially the custom liquid cooling. Its rather large size makes it great for using custom loop cooling and installing multiple fans. The case holds the cubic appearance that looks minimalistic and robust.
What We Disliked:
The fan hub is a great addition, but it would be nicer if they allowed us to use the fans included with their own hubs that can be purchasable with their fans. If you are choosing to go with a radiator, in this case, you may face challenges. The radiator installed on the top cannot fit with the fans under the glass. In order to counter that, the radiator needs to be installed at the bottom of the bracket while the fans are to be mounted above the bracket right below the glass. This way, it also supports push-pull configuration as well, but this does make the installation process tad more difficult. Nonetheless, the end-product is very promising and is worth the whole hassle.
What sets the Thermaltake View 51 Snow Apart From Its Competitors:
The pre-installed fans are neither 140 mm nor 180 mm, but an astonishing 200 mm, and two of them cover the whole front panel. This is certainly a feature Thermaltake has provided, and they add to the regulation of optimum airflow. This case competes with many of the open cases the market has to offer since it doesn’t have any tint on the glass panel. Finally, for a full-tower case that has glass panels on top and front, this case falls in an economical range.
This case is a whole package, with the great looks, the regulation of airflow, and especially the price. However, there are a few things that could’ve been better. There is a lot of support for the fan, but the hard drive support is slightly limited. They could’ve placed more storage bays since it is a very large case.
The vertical mounting bracket for the GPU seems to provide a slight hurdle for some users that are installing a thick radiator at the bottom. Regardless of these downsides and considering the price, the Thermaltake View 51 Snow easily falls under the category of being one of the best White Full Tower PC Case.
- Economical for a full-tower case
- Design similar to expensive open-cases
- Great for custom loop cooling
- Extensive fan/radiator support
- Economical for a full-tower case
- Lack of drive bays
- Installation can be a little tricky
Cooler Master Cosmos C700P Black Edition
Full Tower High-End PC Case
Specifications: Type: Full-Tower Case | Colors: Black | Motherboard Support: Mini-ITX, Micro-ATX, ATX, E-ATX (Support 12″ x 11″) | Dimensions: 651 x 306 x 639 mm | GPU Clearance: 490 mm (w/o 3.5″ HDD cage), 320 mm (w/ 3.5″ HDD cage) | CPU Cooler Clearance: 198 mm | PSU Clearance: 336 mm | Ports: 4x USB 3.0, 1x USB Type-C, 1x 3.5mm Audio Jack, 1x 3.5mm Mic Jack, Fan Speed, RGB Control Buttons | Drive Bays: 4x 3.5/2.5 inch (Combo), 4x 2.5-inch, 1x 5.25-inch | Included Fans: Total 3x fans – 2x 200 mm RGB (Front) and 1x 120 mm RGB (Rear)
Cooler Master doesn’t need an introduction since it has taken over the computer industry. You will find their products almost everywhere, with someone using their mouse or keyboard or their famed CPU cooler. This time we are going to review one of Cooler Master’s extremely famous PC cases, the Cooler Master Cosmos C700P Black Edition. It is the remodeled version of the legendary Cosmos II that launched nearly thirty years ago, and it does come with a lot of differences.
The Cooler Master Cosmos C700P Black Edition uses a combination of multiple materials for its structure. These materials are a mixture of aluminum, steel, plastic, and tempered glass that are paired well with the grey-black color combination. The aluminum feet and handles resemble ski attachments with remarkable curvature on each side that allows you easily to detach the front and the rear panels. With all these materials, this case is very bulky and weighs 22.2 kilograms, and this is where the top handles come in handy.
Moving onto the side, the tempered glass panel featured on the Cooler Master Cosmos C700P Black Edition is no ordinary glass panel. It goes along the side panel and also curves towards the front panel. On the other side, there is a similar panel but made with plastic material, and both of these panels open like the doors of a Rolls Royce, which can also be lifted off thanks to the rear hinges they rest on. It is recommended that you remove both these panels since it takes a few kilos off of the entire case and eases the installation process.
On top of the case, we get an I/O panel consisting of a large rounded-hexagonal power button in the middle. Just below this button lies the USB Type-C, and two USB 3.0 ports lie on both of its sides, with the audio and mic port present below them. At the far top, there is a reset button, while at the far left, a fan button can be seen with two fan settings of high and low speeds. At the far right, there is an RGB button with three configurations, including cycle, static, and M/B. These RGB lights are controlled by a 4-pin RGB connector that you get in this case, and any of the three sections, including the top, bottom, and front, can be disconnected from the hub if you prefer to turn it off.
Since the sides and the top part are covered, let’s move to the front section now. Once the front steel panel is removed, it reveals a removable dust filter that isn’t fine, and it is designed this way to limit the bottleneck of the airflow since the front portion is close to the dust filter. Behind this filter, a fan bracket can be found with two 140 mm pre-installed fans. Furthermore, you are free to install three 140 mm fans, a 280 mm, 360 mm, or a 480 mm radiator on this bracket.
Above these fans, there is a spot left for a single 5.25-inch drive bay, which cannot be moved down since the fan bracket is on the way. You also have to remove this bay in order to install a 360 mm radiator. This makes the installation a bit more difficult. Peeking inside the interior of this case, there are large metal covers, one on the side to hide the drive bays and the other one to hide the PSU. On the side of the PSU shroud, there is an SSD mount, but the shroud is only secured from one side, making it wobble from the other end. Behind the metal cover, only two drive brackets are found. On the other side of the case, we get two SSD caddies where one is already occupied by the fan hub.
What We Liked:
The handles on top of the case are sturdy enough to hold the whole case, making it easier to move it around. The manufacturing of the curved glass was not simple and required more than just hard work, which is appreciated since Cooler Master went above and beyond to give one of their most iconic cases a feature that would be memorable in the future. The window panel is completely black, which looks great and stealthy since the components aren’t fully visible but slightly glitter when viewed from close.
What’s interesting is that the bracket sitting at the top is the same as the one in the front, which means it has the same support for the fans and radiators as the front panel. This feature allows users to go all-in with the water cooling option without limiting themselves.
Now onto the best part about this case, the unique RGB. Cooler Master gives you a complete light show, all thanks to the highly diffused and glamourous RGB light strips that stretch across the handles and base of the case. The light lies beneath a white translucent cover that diffuses the sharpness of the RGB, making it much more pleasing to the eye. This diffused light also revolves around the I/O ports, so the front panel is also not missing out on any of the lighting action.
What We Disliked:
The color coordination and the use of different materials is a great choice by Cooler Master. However, the steel part on both the exterior and the interior is prone to get smudges and finger marks, unlike the plastic part, which stays clean. Secondly, the curved tempered glass panel looks stunning on one end. However, there is a plastic panel on the other side, which doesn’t appear minimalistic since it lacks uniformity.
The PSU shroud doesn’t look good since it is not a rigid shroud and the plastic also seems like a cheap material to use for the shroud. The previous Cosmos had 11 drive brackets, while this one is only limited to two, which would leave any cosmos fan disappointed. They haven’t added dual system compatibility as there is room for an ITX system in this enormous case.
What sets the Cooler Master Cosmos C700P Black Edition Apart From Its Competitors:
If we were to talk about only one thing that makes it different from its competitors, it would inarguably be the curved tempered glass. The way the window is discreetly held and curves to the front panel give it a modern look, and it steals the show with this very feature. If we were to go more than the curved window panel, the RGB light show is what we would highlight. This feature provides a literal light show as the RGB spills are softened by the translucent cover and are unlike any RGB that other cases have to offer.
This Cooler Master Cosmos C700P Black Edition is one of the few cases that utilize its fully modular frame in which you can inverse the orientation of the motherboard if you prefer to move it on the left side, all thanks to the side panels that can be swapped easily.
The Cooler Master Cosmos C700P Black Edition might be the best Cosmos case we have reviewed. However, a few things seem to be out of place for a case that has true potential. It went above and beyond to provide greater support for water cooling options and a fully modular frame but lost track in the paneling section to hide the goodness located in the front. It would have been better to see the PSU shroud extend towards the far end of the bottom section, and the material should have been steel instead of plastic.
The RGB is what seals the deal because you don’t get this type of lighting anywhere unless you install them separately. Additionally, diffusing the light in the RGB strips is a hassle, and the diffusers need to be adjusted to the same length and are not cheap. Since this case doesn’t come cheap, it would have been nicer to get Cooler Master’s top-notch fans instead of the standard ones they provided with this case.
The ability to invert the motherboard is a great addition and allows users to install it in different spots, thanks to the mounting locations. However, the user manual doesn’t provide guidance in inverting the motherboard. Other than that, the case is designed with different materials, but the use of plastic may decrease the look but still prevents fingerprint smudges, which is a great addition as well.
Nonetheless, the Cooler Master Cosmos C700P Black Edition case is a top-notch case that is unique from its competitors and provides the utmost features, due to which it has reached the ranks of being one of the best full tower high-end PC case.
- Smudge-free plastic panels
- Extremely appealing diffused RGB
- Pitch black curved tempered glass
- Ability to invert motherboard layout
- Easy to carry with rigid handles
- User manual isn’t effective
- Metal panels get finger marks
Phanteks Enthoo Pro Full Tower
Cheap Full Tower PC Case
Specifications: Type: Full-Tower Case | Colors: Black (with orange, white or black linings) | Motherboard Support: ATX, EATX, mATX, SSI EEB | Dimensions: 535 x 235 x 550 mm | GPU Clearance: 472 mm (w/o HDD cage), 347 mm (w/ HDD cage) | CPU Cooler Clearance: 193 mm | Ports: 2x USB 3.0, 2x USB 2.0, Mic, Headphone | Drive Bays: 6x 3.5, 7x 2.5-inch, 3x 5.25-inch | Included Fans: Total 2x fans – 1x 200 mm (Front) and 1x 140 mm (Rear)
This case by Phantek is none like the ones we covered above. Phantek is an emerging computer brand that has launched the Enthoo series for its full tower PC cases users. This series began with the classic Enthoo Primo that held an old-school look not because it was designed as such but because it was the first-ever case manufactured by Phantek. The Enthoo series has expanded to fit the mood of modern-day users while maintaining that old-school look that started this series. Far down the line, Enthoo Pro came into existence that resembles the original Enthoo Primo but is better in its own way.
It arrives in two variants, the windowed and the non-windows version. One offers an Enthoo Primo-style glass panel, and the other has a solid metal panel, respectively. The cost difference between both versions is $10, with the windowed version being obviously more costly.
Moreover, the exterior appears to be brushed gun-metal aluminum, while in reality, the materials used is high-quality plastic. On the front panel, we can see four cutouts for the hard drive, with only three being used for drive bays while the fourth and the top one act as stealth covers. Behind this cover, the I/O panel is present with two USB 3.0 ports, 2 USB 2.0 ports, followed by audio and a mic jack, and a reset button.
Taking off the front panel, we get a removable dust filter on the cover and a pre-installed 200 mm fan mounted on the bracket with proper cutouts on both sides for optimal airflow. Additionally, there is support for dual 120 mm fans or 140 mm fans if you prefer to enhance the airflow. Speaking of airflow, both the sides of the front panel have diagonal cutouts for side ventilation that aids in the airflow delivery, but they don’t have any dust filter on them.
Jumping on the top part, we get a minimalistic layout with the power button being secluded in the middle. A large rectangular mesh sits above the power button with a removable dust filter. Upon removing this top filter, you get unrestricted cooling support by getting triple 120 mm or 140 mm fan mounts. You also get astonishing support for the radiators as well, since you can fit up to a 420 mm radiator on top.
At the rear end, a pre-installed 140 mm exhaust fan with height-adjusted mounting strips that allows flexibility for radiators that will be placed on the top. Eight PCIe expansion slots take up the space below the fan. Right besides these slots, we get dedicated reservoir mounting cutouts for water cooling builds that can easily fit two reservoirs.
Peeking at the interior, there is a separate PSU shroud, which is only available for the windows version, and a large cover for the drive bays and on the right side. The main chamber where the motherboard lies is riddled with rubber grommets for better cable management. At the backside, the provided velcro keeps the cable management intact. There is a fan hub for six fans that can be connected to the motherboard via a 4-pin connector, and non-compatible motherboard users get a SATA cable.
There is also support for up to 240 mm radiator at the bottom, but the PSU bracket has to be removed. For the front part, a 240 mm radiator can easily sit without any worries.
What We Liked:
This is a non-RGB case, but the power button is illuminated with RGB revolving around it, which gives it a very minimalistic look. All the drives are accessible from the rear, which makes the whole thing neat. The vertical drive bay cage has a supporting bracket that allows you to install an included bracket with several mounting holes, which gives you the freedom to install different types of reservoirs.
This case is designed to have perfect cable management. On the back of the motherboard tray, an SSD mount is present where the SSD can be relocated at the very bottom. In addition, there is an ample amount of space underneath the case that further aids in the cable management process.
What We Disliked:
The PSU shroud is excellent and has rubber grommets that hide the cables very well. However, you must remove it in order whenever you need to access the power supply. This is a long and tedious process since the three screws at the back hold this shroud. Additionally, the sides have rubber grommets, but the top portion has nothing on it. The incorporation of SSD mounts or even more cutouts for wires would have been nicer since the place is empty.
What sets the Phanteks Enthoo Pro Apart From Its Competitors:
The plastic appears to be brushed aluminum which not only makes it look like a high-quality, robust case but also prevents any smudges or finger marks from appearing on the surface. Many cases should opt for this material instead of using standard steel panels that attract smudges.
For this price point, getting the 420 mm radiator support is very impressive since it is mostly supported in most of the expensive high-end cases. The vertical hard drive cage is large enough to allow you to install two 120 mm fans. This is a pretty unique feature; it does look very different since not many cases offer this support.
The two removable drive cages have outstanding drive caddies that uses a design similar to a bird spreading its wings to secure the drives. There are mounts in the middle for SSDs as well, in case you want to install one here. This design is very impressive since it is more secure for the hard drive since there is no need to flex the plastic for mounting. It also utilizes the space to incorporate an SSD, which is always a plus point in any case.
A toolbox also arrives with the case that conveniently separates your extra screws in an organized way. This is an excellent addition since it is a much better alternative over a single bag that most cases come with.
Finally, the entire chassis is equipped with the ability to be completely disassembled. Since the optical drive brackets, top frame, side drive panel, and the front panel are attached with screws instead of rivets, they can come out just as easily. This is a very unexpected feature Phantek has added for a case that falls in this price range.
To conclude, the Phanteks Enthoo Pro is packed with several features with only a few forgivable downsides, all of this in an extremely reasonable price tag. There is a great regulation of airflow in the overall case, and the spaces left for reservoirs and radiators scream the need for high-end water cooling capabilities. Storage doesn’t seem to be a problem since this case is rigged with drive bays frequently placed in convenient spots.
There is no RGB in this case which might serve as a downside for a few users, but the price point is what stops us from complaining. The lack of RGB actually shows us that this case has kept a connection to its predecessor, the first Enthoo Primo case. The fully modular chassis gives modders a treat since only high-end expensive cases offer this ability. The design of the PSU shroud has slight issues like the possible accommodation of SSDs on top of it. However, these issues fade away as we recall the incredibly impressive price tag. All things considered, this case earns the position of being the best cheap full tower PC case.
- Extremely cheap for a full case
- High-quality smudge-free material
- Fully modular for this price point
- Up to 420 mm radiator support
- Toolbox for extra screws
- PSU shroud doesn’t have an SSD mount
- No RGB
- PSU shroud has fewer cutouts
be quiet! Dark Base Pro 900
Quiet Full Tower
Specifications: Type: Full-Tower Case | Colors: Black | Motherboard Support: E-ATX, XL-ATX, ATX , M-ATX, Mini-ITX | Dimensions: 586 x 243 x 577 mm | GPU Clearance: up to 472 mm | CPU Cooler Clearance: Up to 185 mm | Ports: 2x USB 3.0, 1x USB Type-C, Mic, Headphone, Qi Wireless Charger | Drive Bays: 7x 3.5, 14x 2.5-inch, 2x 5.25-inch | Included Fans: Total 3x fans – 2x 140 mm (Front) and 1x 140 mm (Rear)
Be Quite! Don’t worry; I’m not ordering you to seal your mouth. It is merely an aggressive name of a well-known computer brand that delivers great cooling solutions that focus on being, of course, quiet. Apart from providing high-quality, they also provide power supplies and accessories for your PC and PC cases. Since we’re on the topic of reviewing the best full tower tempered glass case, the Dark Base Pro 900 rev 2 can simply not go unnoticed.
The Dark Base Pro 900 rev 2 is the revised version of the Dark Base Pro 900 that was a phenomenal PC case. The rev 2, however, is on a completely different level. Speaking of the exterior, it consists of a high-quality brushed aluminum finish. We get a tempered glass that is held by four short thumb screws with rubber housings on each peg. There is a slight lip at the bottom to secure the panel and has a black stripe extending the top and the bottom side to cover the frame from underneath.
These were the similarities the rev.2 had with the previous version. Let’s dive into the new features added. Since Be Quite! lives up to their name, the entire chassis is rigged with noise damping material, making it a very silent case. The chassis is also airflow-focused since ventilation channels with very tiny holes surround the frame.
Additionally, this case arrives with three pre-installed 140 mm fans, with two in the front and one at the back of the case. These are one of Be Quite’s high-end fans, the Silent Wings 3. These PWM non-RGB fans can ramp up to 1000 RPM while only producing 15.5 dBA of sound, making them extremely silent fans. A slider lies just below the I/O ports that is responsible for the speed controlling the speed of these fans.
The be quiet! Dark Base Pro 900 also welcomes water cooling solutions with open arms by supporting up to 420 mm radiator at the front and the top by only removing the 5.25” drive bays and the wireless charger dock.
An angular design seemingly connects the top edge of the front section with the top end of the front panel. This portion consists of the I/O ports with two USB 3.0 ports, audio, and a mic jack, all placed on the left side. On the ride side, we get the USB Type-C port and fast charging port. The front panel door can be opened from either side, depending on the layout of your build.
To further add, there is a very convenient fan hub that is effective for eight 4-pin fans and has a dual-channel configuration. You can easily toggle the performance and silent mode with just a switch of a button. All of this is controlled by the PWM cable through your motherboard. You also get dual RGB LED strips, which you can connect to the fan hub as well. These LED strips can illuminate your case’s interior with its solid and blinking modes.
The PSU shroud is inherited from the Dark Base 700 with different-shaped removable plastic pieces up on top. These pieces can be removed to reveal an SSD mount in the middle with two mounts for 120 mm fans on both sides. You can remove the entire shroud, but it is secured by screws, so the disassembly is a time taking process.
What We Liked:
The modularity of this case seals the deal since the plastic covers over the drive bays can be extended at multiple levels because of the ridges at their backside, allowing the cables to pass through for the E-ATX motherboard. Moreover, the motherboard tray is fully removable and adjustable to allow radiators to sit comfortably on the top. It also supports inverting the entire tray to the opposite side; that is something you prefer. On the PSU shroud, the unused sections can be closed with the plastic covers, which look very minimalistic and hides the mesh panel very effectively.
Design-wise, it is available in three different color themes. The reason for saying themes is because it sports an overall black color. What changes is the color of the rubber grommets placed inside and a colored lining that revolves around the whole edges of the case. Be Quite! offers three colors black, orange, and white. This color theme looks very elegant, especially in the orange color, because it stands out and adds contrast to the whole case.
What We Disliked:
Undoubtedly, the brushed aluminum is a high-quality material to use for the chassis that looks very elegant. However, metals like steel and aluminum are prone to get smudges and finger marks easily. This makes the case look dirty and old after a few months since the finger marks are visible from a distance. The previous Dark Base Pro also had the same material so using a different smudge-free material, like sand brushed aluminum, for the Rev. 2 would have been nicer to see.
In order to extend the plastic covers over the drive bays, you need to compress all three pieces simultaneously which is quite a bit of a hassle. The PSU shroud is designed to be symmetric to match the alignment on both sides to fit right into place. Due to this design, it is not a drop-and-place solution since you have to go at a certain angle to allow it to fit.
Placing a 420 mm radiator on the top panel can be a bit of a hassle. You need to remove the 5.25” drive cage and the wireless charger dock. This could easily be fixed by using the same slidable bracket, Be Quite! Used in their Dark Base 700.
What sets the be quiet! Dark Base Pro 900 Apart From Its Competitors:
How can we not talk about anything except for the best part? The top panel has a rectangular border with a square border in the middle. This is none other than a built-in Qi charger provided by Be Quite! The Qi charger is not only convenient for wirelessly charging your phone, but it also charges your peripherals.
Dark Base Pro 900 is one of the few cases that has a removable 5.25-inch drive bay. A feature that is unfortunately not found in modern cases but many users want it nonetheless. The design offers linings around the case, and small details painted in the three provided colors, which are vivid and almost imitate an LED light when light falls onto them, especially the orange color.
The Dark Base Pro 900 rev 2 is a great revision from its previous model. While keeping the good aspects, it does provide additional features like the PSU shroud with increased functionality with the plastic covers to hide it. On the flip side, the assembly process for the power supply unit is not that easy. Furthermore, the RGB strip is not flexible which limits the possibilities of easy installation.
This case does not come cheap but it can be easily disregarded since Be Quite! managed to stay true to the modularity aspect. Any case that offers full modularity is very expensive, and this one seems reasonable for its price tag. Moreover, the provided wireless charger, removable 5.25” drives, and the great design seals the deal. The addition of noise damping material and the Be Quite!’s silent fans make the Dark Base Pro 900 rev.2 not only one of the Best Full-Size Pc Case but also an extremely quiet one.
- Wireless charger on top
- Removable 5.25” drive cages
- Fully modular full tower PC case
- Up to 420 mm radiator support
- Color theme instead of solid color
- Fans are Be Quite! Silent Wings 3
- Tricky installation for PSU shroud
- Material may get smudges
- RGB strip is not flexible
Lian Li LI PC-O11 Dynamic EVO ATX Full Tower
Best Full Tower Case for Watercooling
Specifications: Type: Full-Tower Case | Colors: Black Or Snow White | Motherboard Support: E-ATX, , ATX , Micro-ITX, Mini-ITX | Dimensions: 460x 280 x 465mm | GPU Clearance: up to 472 mm | CPU Cooler Clearance: Up to 185 mm | Ports: 2x USB 3.0, 1x USB Type-C, Mic, Headphone, Qi Wireless Charger | Drive Bays: 7x 3.5, 14x 2.5-inch, 2x 5.25-inch | Included Fans: Total 3x fans – 2x 140 mm (Front) and 1x 140 mm (Rear)
Lian Li has introduced yet another High-End case into the market, adding another case in their PC O-11 Lineup of cases, the Lian Li PC-O11 Dynamic EVO. The EVO in the name stands for evolution as it manages to surpass the previous generation Lian Li PC-O11 in more ways than one.
The Dynamic PC O-11 was one of the most popular PC case that one could get their hands on, and the PC O-11 tries to improve upon and add more functionality to it. By looking at the specifications on paper, it is obvious how much effort has been put into improving the already great PC O-11 Dynamic. Starting off with aesthetics, the case is available in both black and white, and much like the older generations of the case, it has a mesh design on the top and rear of the case. The case itself is 460mm tall, 285mm wide, and 465mm deep. The mesh design of the case provides sufficient air cooling from both the top and the rear. Another improvement that was apparent right off the bat was the easy-to-remove side panels. Unlike the previous models of this case, you can now remove the side panels without removing the top cover.
Due to its larger size, the case offers better compatibility, providing a GPU clearance of up to 422m. The PC O-11 Dynamic Evo has four different spots for radiators of various sizes; the top and the side support 360 or 280mm radiators, while 120mm radiators can be installed at the rear. There is also space for a 360mm radiator at the bottom. It also supports E-ATX, ATX, Micro-ITX, and Mini ITX motherboards. As far as the PSU module is concerned, it supports a standard ATX PSU. The case can also be flipped for an inverted layout.
Surprisingly, the front IO can also be positioned at three different spots, which is not something you get to see very often. The IO module can be slid out and placed at the front, front-left, or rear-right side of the case. The IO module itself includes two USB Type A ports, a USB type C port, and an HD audio port. An additional IO kit can also be installed if there is a need for more USB ports.
Additionally, Lian Li has added a ton of storage locations throughout the case, with 17 2.5 Inch SSD options and eight 3.5-inch hard drive locations. While all of these cannot be used at the same time, it is still worth mentioning. There should not be any problem in terms of the storage options in this case.
Another thing the Lian Li PC-O11 Dynamic EVO really excels at is the water-cooling support and the number of options that have been provided. The GPU can be installed vertically inside the case using the vertical GPU kit providing efficient cooling when paired with custom Water-Cooling. The case also comes with RGB lighting, which can be controlled using the buttons provided on the side of the case; the single strip of RGB lighting makes this even more aesthetically pleasing than it already is.
What sets the be quiet! Dark Base Pro 900 Apart From Its Competitors:
Lian Li has put a lot of effort in improving even the smallest details, from the well-built structure, It’s unique and minimalistic design, and its outstanding performance set this apart from most cases available. The improved compatibility and larger size makes it easier to manage the cables throughout the case and allows. The case is packed with features and additional accessories can be bought to make the overall experience even better.
What We Liked:
The Lian Li PC-O11 Dynamic EVO might just be the best case that one can currently purchase; Lian Li has managed to improve in every aspect. Features such as vertical GPU support, Relocatable IO module, and the ability to invert the chassis really makes this a feature-packed case. The front tempered glass panel can also be replaced with a mesh front panel, improving the airflow when using an air CPU cooler. In short, there is a lot to like about the Lian Li PC-O11, and it is definitely worth considering if you are looking to build a high-end water-cooled system with custom loops.
What We Disliked:
The only major downside of this case is the price; given the vast amount of options it provides, the price itself is justified; however if you are going for a mid-range build getting a cheaper case might be a better choice. Other than that, Lian Li has only provided one dust filter with the case, which might be a problem if you have multiple windows in your room.
Out of all the iterations of the Dynamic O-11 case, this one stands out the most. With the new LI PC-O11, Lian Li has not only revamped the design and aesthetic part of the case, but they have also added a lot in terms of the features and functionality. With the PC-O11 Lian li has managed to surpass our expectations in every possible way, making it the Best Full Tower Case for Liquid Cooling.
- IO module can be relocated
- Great Water-cooling capabilities
- Vertical GPU Support.
Mini ITX vs Mid Tower vs Full Tower Case
PC cases play a vital role in housing all the components for your PC, and it is the first thing anyone notices about your build. While they don’t directly influence the performance of your PC, they do provide the appeal and the charm to the whole setup. PC cases come in different shapes, forms and sizes and are categorized into three sizes: Mini ITX, Mid Tower and Full Tower.
Mini ITX Case
Mini-ITX, small-form-factor, or simply Mini PC Cases are designed to be smaller PC cases that cater to the people who face space constraints. They have gained popularity for being the choice of the users who prefer a minimalistic and compact case rather than massive and flashy PC cases. Don’t let the cute appearance of these tiny cases fool you, as they deliver the same performance that you could get from a much bigger build.
These cases take up less space, are easy to build, and fall under the budget case category for most people. For this reason, many companies have decided to produce their own line of small factor components such as single fan graphic cards, SSF power supplies and mini-ITX motherboards. While they look attractive and house essential components, they still lack the space to accommodate additional hardware components. This includes additional RAM sticks, fans, and storage devices including HDDs and SSDs, which are very important since many games are now huge in size. The regulation of optimal airflow is also a slight issue with these cases, although many mini cases are designed in a certain way to regulate most of the airflow.
Mid Tower Case
The Mid-Tower cases are the most commonly used cases in the market. These cases lie comfortably between the Mini-ITX cases and the Full-tower cases. They are packed with reasonable form factors and have the appropriate amount of internal capacity. While they pack a great deal of computing power, the temperature inside these cases is still manageable. The airflow regulation is optimum in this case and doesn’t seem to be problematic for most users since most of them use a neutral airflow configuration. (To know more about airflow, check out Best Airflow PC Cases)
However, these cases are not as compact as small-factor cases and are not as spacious as the full-tower cases. This means they might hinder aesthetics by taking more space than they should but many minimalistic cases are designed to look pleasing despite the size. This also means that there would be a shortage for additional hardware components if you are planning to go all-in with the additional equipment. This is where the full tower case comes in handy.
Full Tower Case
These cases lie in the top-of-the-line category since they offer the most amount of capacity. Being the largest in size and features among the other two cases, they can fit any number of components. Most full-tower chassis arrive with more than ten expansion slots, allowing you to enjoy the additional sound, video, and graphical features.
More space also means better cooling management and are the best to support liquid cooling. Moreover, you are free to install an absurd amount of fans for even better airflow. These cases are absurdly spacious and has a lot of storage drive bays. This feature allows you to install a large amount of storage drives, so you never have to worry about running out of space even after installing multiple huge games.
On the flip side, these enormous cases are very bulky and require a lot of space; therefore, working with them and moving them can be a bit of a hassle. They are also very costly since plenty of components reside inside them. Additionally, liquid cooling and additional fans add to the cost of these cases.
Full Tower cases are the largest in size compared to mid-tower and mini ITX cases; this is because they have full support for motherboards E-ATX or even XL-ATX motherboards in some cases. Full tower PC cases usually stand at a height of 55 to 75mm and they have a width of 22-32 centimeters. Full tower cases are generally packed with more features, including better compatibility. Better clearance and better cable management. They also allow the user to upgrade to a beefier or bulkier GPU or CPU cooler later down the line.
Frequently Asked Questions
The minimum standard height for a full tower PC case is about 22 inches or 55 cm, whereas many full tower cases are usually taller. Other dimensions like width and depth can differ for different manufacturers, but it lies between 10 to 20 inches.
Full tower cases are the largest cases that you can buy to house all your PC components in.
The main difference between a full tower and a mid-tower computer case is the size; mid-tower cases are usually way smaller than full tower cases. With a smaller size comes fewer features and support for a smaller motherboard.
Generally, Full tower Pc cases support E-ATX, ATX, Micro-ITX and Mini ITX motherboards.
You can measure its height if you don’t know whether your PC case is a full tower or a mid-tower. Mid-tower cases are much shorter/smaller than a full tower case. If your case is 22 inches or taller, then it is a full tower case, and if it is smaller than 22 inches but taller than 18 inches, it is a mid-tower case.
A full tower PC case dimensions make it suitable for multiple GPU setups. A full tower case can fit three or even four GPUs, which can be beneficial for 3D rendering, gaming, and other works that require high computation power.
A full tower case is large enough to hold an EATX motherboard inside easily. On top of that, it can even fit an XL-ATX motherboard, which is larger than an EATX but less wide. If you build a PC with an EATX motherboard, buying a full tower case will be ideal.
Thank you! Please share your positive feedback. 🔋
How could we improve this post? Please Help us. 😔