MSI MEG Z890 GODLIKE: Most Expensive Z890 Motherboard Exceeding 1200$

Expert Verified By

The Second Most Expensive Motherboard is Almost Half Cheaper!

The latest Z890 motherboards for Intel Core Ultra 200 processors will be released on October 24th. The MSI MEG Z890 GODLIKE motherboard, which will be the top-of-the-line for MSI, will be the most suitable for better performance for Intel Ultra Core 200 processors.

However, the MSI motherboard manufacturer company has gone too far with the price exceeding $1200 for this motherboard.

Why it matters: The MSI MEG Z890 GODLIKE motherboard’s price tag will raise some eyebrows, as the second-most expensive motherboard is almost half cheaper.

MSI MEG Z890 GODLIKE Price

MSI Gaming officially revealed the prices in a live stream on YouTube. In this livestream, you can see that the price of MSI’s flagship MEG Z890 GODLIKE has been revealed: $1264 in the USA and around €1380 in Europe. With the 20% VAT in European regions, it costs around $1500.

The second most expensive motherboard on the list is half the price of this one: the MSI MEG Z890 ACE costs $689. The difference between these is not much in Gaming performance but in VRMs for overclocking and greater connectivity capabilities for professional use.

MSI MEG Z890 GODLIKE

A good feature of the MSI MEG Z890 GODLIKE is its potent 26+2+1+1 power phase VRM. Additionally, two 8+8-pin EPS and a 24-pin ATX connector are needed to provide the CPU with all the power it needs under extreme overclocking conditions in a reliable way.

The Frozr Guard cooling system provides cooling for this VRM, which consists of thermal pads with a 9W/mK thermal transfer and two aluminum heatsinks connected to a copper heat pipe. Additionally, the M.2 ports have a dual-sided cooling system in addition to the Frozt AI program, which optimizes performance at low temperatures.

MSI MEG Z890 GODLIKE Connectivity

One of the reasons it’s expensive is that it features Thunderbolt 5 connectivity with speeds of up to 160Gbps. There’s also the XPANDER-Z SLIDER GEN5 M.2 expansion card for installing up to 2x additional PCIe 5.0 SSDs. It supports DDR5 RAM up to 9,200 MT/s with overclocking and even includes a 3.99-inch Dynamic Dashboard III LCD display.

With this huge amount of connectivity, we can see that the price is tied to this, and it is also suitable for only a few people, like enthusiast overclockers, not for the masses.

Was our article helpful? 👨‍💻

Thank you! Please share your positive feedback. 🔋

How could we improve this post? Please Help us. 😔

Gear Up For Latest News

Get exclusive gaming & tech news before it drops. Sign up today!

Join Our Community

Still having issues? Join the Tech4Gamers Forum for expert help and community support!

Latest News

Join Our Community

104,000FansLike
32,122FollowersFollow

Trending

Xbox Console Prices Bumped Up by $100-$150, Series X Will Now Cost $800

Xbox console prices have been increased from $100-$150, and the Series X will now cost $800, just a $100 less than the PlayStation 5 Pro.

Bungie Cuts Nearly Half Its Workforce, Laying Off Around 400 Employees After Marathon’s Failure

Sony confirms layoffs at Bungie. It is reported...

Steam Machine Sold Out in Japan in Less Than 48 Hours, Despite Costing Over $1,175

Steam Machine orders went live in Japan through Komodo Station, the official distributor, and all 4 configurations sold out immediately.

Valve Quietly Shifts Steam Machine’ Performance Stats From 4K 60 FPS to “Up To 4K” Gaming

Valve has changed the Steam Machine performance figures from the previous 4K 60 FPS gaming to just 4K gaming with FSR 4.1.

AMD Engineer Builds A Stronger Steam Machine-Style ITX PC With RTX 5060

An AMD engineer built his own Steam Machine-styled PC with a mini-ITX motherboard, RTX 5060, and a 400W Flex PSU in a similar price range.