The company  EVGA has prepared GeForce GTX Titan X Hydro Copper, which is pre-accelerated and adapted to the liquid cooling.

EVGA GeForce GTX TITAN X Hydro Copper

GeForce GTX TITAN X Hydro Copper is based on the reference PCB, on which Big Maxwell GM200 graphics core is fused with 3072 CUDA cores and 12 GB of GDDR5 384-bit memory interface.

The Core Clock frequency is 1152 MHz in standard mode and 1,241 MHz in Turbo Boost 2.0 mode, while the memory frequency is standard 7010 MHz – therefore can said to be that this is the world’s most powerful card with one GPU Core.

The Card is featuring cooling water block from EK side, which belongs to the type of construction Full Cover – this means, that not apart from GPU core the power section and a memory chip will also entertain from cooling. It is a pity that the manufacturer has not decided to apply the backplate.

For display output there are DVI-I, HDMI 2.0 and DisplayPort 1.2 3x ports. The additional power supply leads one 6-pin and one 8-pin.

Specifications of EVGA GeForce GTX TITAN X Hydro Copper:

  • Core: Maxwell GM200
  • Stream Processors: 3072
  • core clock: 1152/1241 MHz
  • Video Memory: 12 GB GDDR5 384-bit
  • Memory clock speed: 7010 MHz
  • power connectors: 6 + 8-pin
  • Video Output: DVI-I, HDMI 2.0, 3x DisplayPort 1.2
  • cooling: water block

EVGA GeForce GTX TITAN X Hydro Copper price will be $150 higher than the reference version. For comparison, the reference Titan X costs $999.

Source: EVGA

Previous articleSK Hynix revealed HBM1 and HBM2: AMD Fiji will use HBM1 and NVIDIA Pascal with HBM2
Next articleLawsuit Submitted Against Facebook For Sexual Harassment and Racial Bigotry
Hardware enthusiast, Gamer, Writer. I enjoy picking up games, putting them back down, and then writing about it.